This wireless test silence locator is the control unit for the FireAngel alarm system. It offers a central location from which you can test, silence, or locate any triggered alarms on the Wi-Safe 2 system. It’s suitable for people with up to moderate hearing loss.
This FireAngel control unit is designed to be used as a remote interface on a network of up to 49 products within the Wi-Safe 2 alarm range. It’s a central location from which you can test, silence, or locate alarms which are part of the system. Suitable for people with up to moderate hearing loss.
Wi-Safe 2 enables wireless communication with any other product with Wi-Safe 2 technology inside. When one alarm detects smoke, heat or carbon monoxide, it sends a signal to all the connected alarms, ensuring an almost instantaneous reaction across the network. It’s very easy to set up and link to all other units in the system.
Enjoy total peace of mind that your smoke, heat and carbon monoxide alarms are working properly. The test button allows you to check all interlinked alarms from one centralised location.
Stay in control with the silence button. It lets you to silence all interlinked smoke and heat alarms. Pressing the silence button will reduce the sensitivity of alarms for up to 10 minutes, unless carbon monoxide has been detected, in which case you can use the locate button (see below) to find the source alarm.
If there’s a fire or carbon monoxide leak, you can quickly work out where it is in the house using the locate button. It silences all interlinked alarms except the alarm(s) that have identified the emergency.
The control unit has a useful memory function. If one of the alarm indicators is flashing every 10 seconds this tells you that a smoke, heat or carbon monoxide alarm has previously been activated.
In the box:
To download the FireAngel wireless test silence locator installation and user guide, please click here.